AEC Noticeboards
http://middx.net/aec/board/

Drum extractor bolts
http://middx.net/aec/board/viewtopic.php?f=2&t=68
Page 1 of 1

Author:  Brian Watkinson [ Sat Mar 17, 2012 1:19 pm ]
Post subject:  Drum extractor bolts

Anyone know where I can get some new extractor bolts for Regent lll brake drums. Our current ones are a little tired now ie stripped!

Author:  cav551 [ Sat Mar 17, 2012 6:20 pm ]
Post subject:  Re: Drum extractor bolts

I can't swear to it, but I think you need 1/2" BSF. Google Namrick, who can supply bolts or hex head set screws of most lengths.

Author:  Brian Watkinson [ Sun Mar 18, 2012 9:28 am ]
Post subject:  Re: Drum extractor bolts

Thanks, yes they are 1/2"BSF with a continuous thread, length is about 2".

Author:  ERF [ Tue Mar 20, 2012 8:39 am ]
Post subject:  Re: Drum extractor bolts

I have always found AHC Camberley good, if a little expensive for obscure things like BSF.
The 1/2 BSF x 2" HT setscrews are their stock number 0318S0180200

They have a website....

http://www.ahc-camberley.co.uk/catalog/ ... =1a&page=3

....should show the page with these on.

Author:  Brian Watkinson [ Thu Mar 22, 2012 8:17 am ]
Post subject:  Re: Drum extractor bolts

Thanks for that, but 2" machine bolts at £8 each are incredibly expensive compared to Namrick whose equivalent bolts are less than £2 each. Anyone loking for ordinary BSF bolts should look at Lawson HIS Ltd who are clearing out BSF bolts at a really low prices, delivery is fast as well.

Author:  cav551 [ Thu Mar 22, 2012 8:54 am ]
Post subject:  Re: Drum extractor bolts

For the benefit of anyone not familiar:
I haven't had an RT drum off recently, but I have removed an RF one and the material is very thin around the withdrawal holes so great care is needed not to crack the drum.

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/